Homelite HL-1270N, HL-P2500, 2400C Using HP-GL/2 Color Mode, Black reference for value #1, #2, #3

10/10/03

♣Black reference for value #1, #2, #3

♣This mode specifies the black value (the highest level of density).

♣Each value indicates a color as follows;

#1: red

#2: green

#3: blue Range: -32767 ~ 32767

•When the encoding mode is 2 or 3, this setting is valid.

2.3.Using HP-GL/2 Color Mode

Two methods are provided to set the color mode in the HP-GL/2 mode. Set the color mode by the PCL command, then transfer to the HP-GL/2 mode. Execute the NP command.

For the details on how to use the color selections in the HP-GL/2 mode, refer to Section 6 ‘HP-GL/2’.

CHAPTER 3 "PCL5C" - 9