Homelite HL-P2500, HL-1660E, HL-2400CE, HL-1450, HL-1050 Set area fill identity, Esc*c#G 274299#71

10/10/03

For example

Pattern

Source image

(Source image is transparent)

Destination image

With transparent pattern

Possible results

With opaque pattern

6.1.3.Set area fill identity

Esc*c#G (27)(42)(99)#(71) <1Bh><2Ah><63h>#<47h>

•This command sets the pattern ID of a shading tone, a fill pattern or a user-defined pattern for subsequent selection with the Set Pattern Type command.

•# 1 ~ 100 specify the percentage of a gray scale.

•# 1 ~ 6 select a fill pattern.

•# 1 ~ 32767 select a user-defined pattern.

•You can specify a gray scale tone from 1 to 100. To use the specified tone for shading you must then select one of the two gray scale pattern options with the Set Pattern Type command.

For example

Fill patterns

# = 1 # = 2 # = 3

# = 4 # = 5 # = 6

CHAPTER 2 "PCL" - 70