The devices are paired. The Bluetooth bar code reader responds with a series of beeps and LED flashes.

Note: After scanning the Thor VM1 Bluetooth label, if there is no beep and no LED flash from the Bluetooth bar code reader, the devices are currently paired.

See Bluetooth Beep and LED Indications (page 5-16).

Bluetooth Beep and LED Indications

Beep Type from Bluetooth Device

Behavior

 

 

Acknowledge label

1 beep

 

 

Label rejected

2 beeps at low frequency

 

 

Transmission error

Beep will sound high-low-high-low

 

 

Link successful

Beep will sound low-medium-high

 

 

Link unsuccessful

Beep will sound high-low-high-low

 

 

LED on Bluetooth Device

Behavior

 

 

Yellow LED blinks at 2 Hz

Linking in progress

 

 

Off

Disconnected or unlinked

 

 

Yellow LED blinks at 50 Hz

Bluetooth transmission in progress

 

 

Yellow LED blinks at the same rate as the paging beep (1 Hz)

Paging

 

 

Green LED blinks once a second

Disabled indication

 

 

Upon startup, if the Bluetooth device sounds a long tone, this means the Bluetooth device has not passed its automatic Selftest and has entered isolation mode. If the Bluetooth device is reset, the sequence is repeated. Contact Technical Assistance (page 9-1)for assistance.

Bluetooth Printer Setup

The Bluetooth managed device should be as close as possible, in direct line of sight, with the Thor VM1 during the pairing process.

1.Open the Bluetooth EZPair Panel.

2.Tap Discover. Locate the Bluetooth printer in the Discovery panel.

3.Tap and hold the stylus (or double-tap) on the Bluetooth printer ID until the right-mouse-click menu appears.

Select Pair as Printer to pair the Thor VM1 with the Bluetooth managed printer.

The devices are paired. The Bluetooth managed printer may respond with a series of beeps or LED flashes.

Please refer to the Bluetooth managed printer manufacturer’s User Guide; it may be available on the manu- facturer’s web site. Contact Technical Assistance (page 9-1)for Bluetooth product assistance.

Note: If there is no beep or no LED flash from the Bluetooth managed printer, the Thor VM1 and the printer are currently paired.

Easy Pairing and Auto-Reconnect

The Bluetooth module can establish relationships with new devices after the user taps the Discover button. It can auto-reconnect to devices previously known but which have gone out of range and then returned within range (up to 32.8 ft (10 meters) Line of Sight).

Note: Configuration elements are persistent and stored in the registry.

Setup the Bluetooth module to establish how the user is notified by easy pairing and auto-reconnect events.

5 - 16