Typical Installation

 

Antenna

Mounting Bracket

Vehicle Safety Cage

Cable

Vehicle Mounted

 

 

 

Computer

Mounting Instructions

1.Attach and secure the desired mounting bracket to the highest point on the safety cage, following these pre- cautions:

•The plate must be mounted so the antenna is not damaged while the vehicle or any of its parts are moving.

•The antenna mounting portion of the bracket must be parallel to the floor.

•If using two antennas, they must be mounted at least 12 inches (304.8mm) apart.

2.Attach the female connector of the coaxial cable to the antenna connector on the vehicle mounted Thor VM1.

3.Secure the whip antenna to the mounting bracket.

4.Connect the antenna cable to the whip antenna.

5.Use cable ties to secure the coaxial cable to the vehicle as necessary. Make sure the cable is routed so it is not damaged by any moving parts of the vehicle.

6.Connect the cable to the antenna connector (Wi-Fi Main or Wi-Fi Aux) on the Thor VM1. If only one antenna is used, be sure to connect it to the Wi-Fi Main connector.

7.Repeat the steps above for the second 802.11 antenna.

4 - 52