Install SIM Card

A SIM card may be required for WWAN.

Equipment Required

The following equipment is user-supplied:

•SIM card for desired carrier

•Torquing tool capable of measuring inch pounds

•#2 Phillips screwdriver bit

Installation Procedure

1. For convenience, the Thor VM1 can be removed from the Quick Mount Smart Dock, though it is not necessary.

2. If the Thor VM1 remains in the dock, disconnect the power cable from the dock.

3. Shutdown the Thor VM1.

4. Place the Thor VM1 face down on a stable surface.

5. Using a #2 Phillips bit loosen the M3 screws and then remove the tethered access panel with the SIM label. This panel is on the right hand side when the Thor VM1 is face down with the top away from the user.

6. Locate the SIM card installation slot.

7. Slide the SIM card into the slot.

8.Reattach the access panel, torquing the screws to 4-5 inch pounds.

9.If removed, reinstall the Thor VM1 in the dock.

10. Restart the Thor VM1.

4 - 57