Bluetooth

Start > Control Panel > Bluetooth

Discover and manage pairing with nearby Bluetooth devices.

Factory Default Settings

Discovered Devices

None

 

 

Settings

 

 

 

Turn off Bluetooth

Disabled

 

 

Computer is connectable

Enabled

 

 

Computer is discoverable

Disabled

 

 

Prompt if devices request to

Enabled

pair

 

 

 

Continuous search

Disabled

 

 

Filtered Mode

Enabled

 

 

Printed Port - COM7:

Disabled (unchecked) by default in both Filtered

 

and Non Filtered Modes. The option is dimmed in

 

Non Filtered Mode.

 

 

Logging

Disabled

 

 

Computer friendly name

System Computer Description

 

 

Reconnect

 

 

 

Report when connection

Enabled

lost

 

 

 

Report when reconnected

Disabled

 

 

Report failure to connect

Enabled

 

 

Clear Pairing Table on Boot

Disabled

 

 

Auto Reconnect on Boot

Enabled

 

 

Auto Reconnect

Enabled

 

 

Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth devices are discovered, paired, connected and disconnected. There may be audible or visual signals as paired devices re-connect with the Thor VM1.

•The default Bluetooth setting is On.

•The Thor VM1 cannot be discovered by other Bluetooth devices when the Computer is discoverable option is disabled (unchecked) on the Settings panel.

•Other Bluetooth devices cannot be discovered if they have been set up to be Non-Discoverable or Invisible.

•When Filtered Mode is enabled, the Thor VM1 can pair with one Bluetooth scanner and one Bluetooth printer.

•When Filtered Mode is disabled, the Thor VM1 can pair with up to four Bluetooth devices.

•It is not necessary to disconnect a paired scanner and printer before a different scanner or printer is paired with the Thor VM1.

•The target Bluetooth device should be as close as possible (up to 32.8 ft (10 meters) Line of Sight) to the Thor VM1 during the pairing process.

Assumption: The System Administrator has Discovered and Paired targeted Bluetooth devices for the Thor VM1. The Thor VM1 operating system has been upgraded to the revision level required for Bluetooth client operation. An application (or API) is available that will accept data from serial Bluetooth devices.

5 - 6