Start > Control Panel > Screen (Classic View)
Set screen properties for the Thor VM1.
Factory Default Settings
Screen Blanking (Blackout)
Enable screen blanking | Enabled |
|
|
Screen on delay (ms) | 1000 |
|
|
COM Port | COM1 |
|
|
Automatic Brightness Control |
|
(for outdoor display only) |
|
|
|
Enable automatic brightness control | Disabled |
|
|
Low to medium light level (%) | 25 |
|
|
Medium to high light level (%) | 75 |
|
|
Current Level |
|
|
|
LCD Brightness (%) | 100 (see note) |
|
|
Ambient Light (%) | (see note) |
|
|
Defroster Control |
|
|
|
Enable defroster | Disabled |
|
|
Trip point (ºC) | 40ºC |
|
|
Note: If automatic brightness control is enabled for an outdoor display, the value for LCD brightness depends on the Ambient Light %.
Note: There is no default value for Ambient Light % as it varies depending on the level of light where the Thor VM1 is located.
5 - 22