Honeywell VM1 Options, Reconnect

Reconnect

Note: These options can still be checked or unchecked whether Bluetooth connection is enabled or disabled.

Options

Option	Function
Report when connection	This option is Enabled (checked) by default.
lost	There may be an audio or visual signal when a connection between a paired, active
	device is lost.
	A visual signal may be a dialog box placed on the display notifying the user the con-
	nection between one (or all) of the paired Bluetooth devices has stopped. Tap the ok
	button to remove the dialog box from the screen.
Report when reconnected	This option is Disabled (unchecked) by default.
	There may be an audio or visual signal when a connection between a paired, active
	device is made.
	A visual signal may be a dialog box placed on the display notifying the user the con-
	nection between one (or all) of the paired Bluetooth devices has resumed. Tap the
	ok button to remove the dialog box from the screen.
Report failure to recon-	This option is Enabled (checked) by default.
nect	The default time delay is 30 minutes. This value cannot be changed by the user.
	There may be an audio or visual signal when a connection between a paired, active
	device fails to re-connect. A visual signal may be a dialog box placed on the display
	notifying the user the connection between one (or all) of the previously paired Blue-
	tooth devices has failed.
	Tap the X button or ok button to close the dialog box.
	Possible reasons for failure to reconnect: Timeout expired without reconnecting; at-
	tempted to pair with a device that is currently paired with another device; attempted
	to pair with a known device that moved out of range or was turned off; attempted to
	pair with a known device but the reason why reconnect failed is unknown.
Clear Pairing Table on	This option is Disabled (unchecked) by default.
Boot	When enabled (checked), all previous paired information is deleted upon any reboot
	sequence and no devices are reconnected.
	When enabled (checked) “Auto Reconnect on Boot” is automatically disabled
	(dimmed).
Auto Reconnect on Boot	This option is Enabled (checked) by default. All previously paired devices are recon-
	nected upon any reboot sequence.
	When disabled (unchecked), no devices are reconnected upon any reboot sequence.

5 - 11