Configuration Cloning Utility (CCU)

Windows Embedded Standard 7 and Windows 7 Professional only.

This utility provides an automated process to read the configuration settings from one Thor VM1 and then apply those settings to one or more other Thor VM1s with the same operating system. The Configuration Cloning Utility (CCU) is installed as part of the factory software load. Configuration settings for the following items may be included:

•RFTerm

•EZ-Pair (Bluetooth)

•Honeywell Control Panels:

»Screen blanking

»USB powered in

»Enable/disable touch screen

»COM port pin 9 +5V or RI

»EWF and HORM (Windows Embedded Standard 7 only).

The CCU allows a configuration file (ccf file) to be created by:

•Reading the current program settings from the source Thor VM1

•Reading the default program settings from a ddf file.

If desired, settings can be modified (advanced user only) before saving the ccf file. If any changes have been made, the CCU can also apply them to the source Thor VM1.

The configuration file can then be copied and deployed to the destination Thor VM1(s). Options include:

•Import changes only - Only those configuration settings which have been modified from their default value are applied to the destination Thor VM1. All other settings on the destination Thor VM1 are left unchanged.

•Import changes and defaults - All configuration settings are applied to the destination Thor VM1. If a setting was modified on the source Thor VM1 the modified value is applied to the destination Thor VM1. Otherwise the default value is applied for that setting on the destination Thor VM1.

The Configuration Cloning Utility can be ran as a GUI or command line interface.

!Before attempting to import settings from RFTerm (page 5-1),or Bluetooth (page 5-6)EZPair, open the program as an administrator and make any desired changes before importing. These programs do not write to the system registry until they have been opened as an administrator.

5 - 29