12.If changes are made to the stored credentials, click Commit to save those changes before making any additional changes to the profile or global parameters.
13.Verify the device is authenticated by reviewing the Status tab. When the device is property configured, the Status tab indicates the device is Authenticated and the method used.
Note: See Configuring the Profile (page
Note: If invalid credentials are entered into the stored credentials, the authentication will fail. No error message is displayed. The user may or may not be prompted to enter valid credentials.
To Use Sign On Screen1.After completing the other entries in the profile, click on the Credentials button. Leave the Username and Password blank. No entries are necessary on the Credentials screen for LEAP or LEAP/WPA.
2.For
3.For
4.Access the Credentials screen again. Make sure the Validate server and Use MS store checkboxes are checked.
5.The default is to use the entire certificate store for the CA certificate. Alternatively, use the Browse button next to the CA Cert (CA Certificate Filename) on the Credentials screen to select an individual certificate.
6.For
7.Click the OK button then the Commit button.
8.When the device attempts to connect to the network, a
9.Enter the Username and Password. Click the OK button.
11.The
Note: See Configuring the Profile (page
If a user enters invalid credentials and clicks OK, the device associates but does not authenticate. The user is again prompted to enter credentials.
If the user clicks the Cancel button, the device does not associate. The user is not prompted again for credentials until:
•the device is rebooted,
•the radio is disabled then enabled,
•the Reconnect button on the is clicked or
•the profile is modified and the Commit button is clicked.
To Use Windows Username and PasswordPlease see Logon Options (page
6 - 16