OneClick Internet

This section contains the User Manual for the customized version of WebToGo's OneClick Internet for the Honeywell Thor VM1.

OneClick Internet is installed by Honeywell on all Thor VM1s equipped with a WWAN radio. Available carriers and OneClick features may vary by device.

OneClick Internet provides:

•Internet connection management

•Email download

•SMS Management

•Contact management for SIM and Microsoft Outlook

•GPS Management

Since WebToGo OneClick Internet is preinstalled, it is present on the Windows Start Menu. A desktop icon is also provided.

!Honeywell does not recommend using standby on the Thor VM1 while the WWAN connection is active. When exiting standby, a delay of one minute or more may occur as the WWAN radio reads firmware files and initializes before recon- necting. If this delay is acceptable to the user, standby may be enabled.

When the One Click Internet utility is displayed on screen and the Thor VM1 enters standby, the touch screen may remain inactive for 10-15 seconds after the Thor VM1 resumes from standby.

Preparing for Initial Use on the Thor VM1

Install SIM Card

If using a CDMA carrier such as Verizon, skip this step because a SIM card is not used.

Install SIM Card (page 4-57)in the Thor VM1.

Load Firmware

While the OneClick Internet utility is preinstalled, it is necessary to load the GOBI radio firmware for your selected carrier such as AT&T, T-Mobile or Verizon.

Note: For carriers requiring a SIM card, the firmware may automatically be selected when a SIM card is installed in the Thor VM1.

Double-tap the OneClick Internet icon on the Thor VM1 desktop.

Tap the Settings button and select the Firmware tab. Select the firmware for your carrier from the list and tap Change.

For more details, see OneClick Internet Connection Manager (page 6-56)and the Firmware (page 6-48)tab.

Activation

This step is only necessary for Verizon.

You need the IMEI number for the Thor VM1 when you contact Verizon prior to activating service on the Thor VM1. The IMEI number can be found on the Info (page 6-48)tab.

The activation screen is displayed automatically after the Verizon firmware is selected. If the activation screen is not automatically displayed, double-tap the OneClick Internet icon on the desktop. Select Settings > General tab and tap the Activate button.

6 - 39