Using the CCU

Refer to the following examples for instructions on using the CCU.

Example 1: Import the current settings and save to a file

To import the current settings from the Thor VM1 running the CCU:

1.If you want to view the settings, tap User and select Advanced.

2.Tap Registry > Import settings.

3.Select the desired program(s) from which to import the settings.

4.Select File > Save then specify a file name and tap Save to save the settings to a ccf file.

5.The ccf file can be used to configure another Thor VM1. See Example 4.

Example 2: Modify settings on the current device and save to a file

To modify the settings on the Thor VM1 running the CCU:

1.Tap User and select Advanced.

2.Tap Registry > Import settings.

3.Select the desired program(s) from which to import the settings.

4.Make any desired changes to the settings.

5.Tap Registry > Apply settings

6.Select File > Save then specify a file name and tap Save to save the settings to a ccf file.

7.Reboot the Thor VM1 for the new settings to take effect.

8.The ccf file can be used to configure another Thor VM1. See Example 4.

Example 3: Reset a device to system defaults

To import and apply the default values to the Thor VM1 running the CCU:

1.If you want to view the default settings before applying, User and select Advanced.

2.Tap File > Open and change the file type to ddf files (*.ddf).

3.Select the desired ddf file(s) for the software program(s) to return to default values.

4.Tap File > Save and specify a file name for the ccf file.

5.Tap Registry > Apply settings

6.Reboot the Thor VM1 for the new settings to take effect.

7.The ccf file can be used to configure another Thor VM1. See Example 4.

Example 4: Clone settings to another device

1.Create a ccf file using any of the above examples.

2.Copy the ccf file to C:\Windows\DDF on the destination Thor VM1.

Note: Rather than using the CCU GUI, the command line can be used to apply the settings to the destination device.

3.Open the CCU on the destination device.

4.Tap File > Open and select the ccf file that was copied to the device.

5.Tap Registry > Import.

6.When prompted to Default all Non-Configured Parameters:

•Tap Yes to set all parameters not configured in the ccf file to defaults on the destination device.

5 - 35