Using Bluetooth

Start > Control Panel > Bluetooth or Bluetooth icon in taskbar or Bluetooth icon on desktop

Tap the Bluetooth icon in the taskbar to open the Bluetooth EZPair application. or

The Thor VM1 default Bluetooth setting is Enabled.

The Thor VM1 Bluetooth® module is designed to Discover and pair with nearby Bluetooth devices.

Prerequisite: The remote Bluetooth devices have been setup to allow them to be “Discovered” and “Connected/ Paired”. The System Administrator is familiar with the pairing function of the remote Bluetooth devices.

Bluetooth Devices Display - Before Discovering Devices

Note: When Filtered Mode is enabled, only Bluetooth printers or Bluetooth scanners/imagers are recognized and displayed in the Bluetooth panel. All other Bluetooth devices are ignored.

Initial Configuration

1.Select Start > Control Panel > Bluetooth or tap the Bluetooth icon in the taskbar or on the desktop.

2.Tap the Settings Tab.

3.Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth Thor VM1 default name is the Computer Description. Honeywell strongly urges assigning every Thor VM1 a unique name (up to 32 characters) before Bluetooth Discovery is initiated.

4.Check or uncheck the Thor VM1 Bluetooth options on the Settings tab.

5.Tap the OK button to save your changes or the X button to discard any changes.

Subsequent Use

Note: Taskbar and Bluetooth device Icon states change as Bluetooth devices are discovered, paired, connected and disconnected. A taskbar Bluetooth icon with a red background indicates Bluetooth is active and not paired with any device. A device icon with a red background indicates a disconnected paired device.

1.Tap the Bluetooth icon in the taskbar or on the desktop to open the Bluetooth EZPair application.

2.Tap the Bluetooth Devices tab.

3.Tap the Discover button. When the Bluetooth module begins searching for in-range Bluetooth devices, the button name changes to Stop. Tap the Stop button to cancel the Discover function at any time.

4.The discovered devices are listed in the Bluetooth Devices window.

5.Highlight a Bluetooth device in the Discovered window and double-tap to open the device properties menu.

6.Tap Pair as Scanner to set up the Thor VM1 to receive scanner data.

5 - 13