Parameter | Default | Explanation |
|
|
|
Encryption | None | Type of encryption to be used to protect transmitted data. Available options may |
|
| vary by SCU version. |
|
| Options are: None, WEP (or Manual WEP), WEP EAP (or Auto WEP), WPA |
|
| PSK, WPA TKIP, WPA CCKM, WPA2 PSK, WPA2 AES, or WPA2 CCKM. |
|
| CKIP is not supported in the Thor VM1. |
|
| Note: The Encryption type chosen determines if the WEP Keys / PSK Keys |
|
| button is active and also determines the available entries in the WEP or |
|
| PSK |
|
|
|
Radio Mode | BGA Rates | Specify 802.11a, 802.11b and/or 802.11g rates when communicating with the |
| Full | AP. The options displayed for this parameter depend on the type of radio in- |
|
| stalled in the mobile device. |
|
| Options: |
|
| B rates only (1, 2, 5.5 and 11 Mbps) |
|
| BG Rates Full (All B and G rates) |
|
| G rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps) |
|
| BG optimized or BG subset (1, 2, 5.5, 6, 11, 24, 36 and 54 Mbps) |
|
| A rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps) |
|
| ABG Rates Full (All A rates and all B and G rates with A rates preferred) |
|
| BGA Rates Full (All B and G rates and all A rates with B and G rates preferred) |
|
| Ad Hoc (when connecting to another client device instead of an AP) |
|
| Default: |
|
| BGA Rates Full |
|
|
|
It is important the Radio Mode parameter correspond to the AP to which the device is to connect. For example, if this parameter is set to G rates only, the Thor VM1 may only connect to APs set for G rates and not those set for B and G rates.
6 - 7