fax setup
chapter 13
3If your PC modem’s software is set to automatically receive faxes to your computer, turn off that setting.
Caution! If you do not turn off the auto fax receive setting in your PC modem software, your HP PSC will not be able to receive faxes.
4Connect a phone to the “out” port on the back of your PC modem.
5Using the phone cord supplied in the box with your HP PSC, connect one end to your telephone wall jack, then connect the other end to the port labeled
Caution! If you do not use the supplied cord to connect from the telephone wall jack to your HP PSC, you might not be able to fax successfully. This special
Now you need to decide how you want to answer fax calls: automatically or manually.
how to answer fax calls automatically
The HP PSC is
Note: If you pick up the phone before the 5th ring and hear fax tones from a sending fax machine, you will need to manually answer the fax call. For information on how to receive fax calls manually from your attached phone and from an extension phone, see receive a fax manually on page 61.
how to answer fax calls manually
To receive faxes manually, you must be available to respond in person to incoming fax calls or your HP PSC cannot receive faxes.
Before you can answer fax calls manually, you need to change the Rings to Answer setting to No Answer as described in set number of rings before answering on page 59. For information on how to receive fax calls manually from your attached phone and from an extension phone, see receive a fax manually on page 61.
case F: shared voice/fax line with answering machine
If you receive both voice calls and fax calls at the same phone number, and you also have an answering machine that answers voice calls at this phone number, connect your HP PSC as described in this section.
124 | hp psc 2400 series |