HP PSC make multiple copies of the same original

chapter 4

10Press to highlight the Photo enhancement setting, and then press OK.

11Press Start Color.

The HP PSC makes a 4 by 6 inch (10 by 15 cm) borderless copy of your original photo, as shown below.

You might find it easier to copy a photo by using the HP Director software that you installed with your HP PSC. Using the HP Director, you can easily make letter or 4 by 6 inch (10 by 15 cm) borderless copies of your photo, enlarge or shrink the photo to fill the size of the paper you have loaded, and turn on Photo enhancements to ensure you get the highest quality photos. For information on using these features in the HP Director, see the onscreen hp photo & imaging help that came with your software.

make multiple copies of the same original

1Load your original face down on the right front corner of the glass.

2Press Copy.

The Number of Copies screen appears.

3Press or use the keypad to enter the number of copies, up to the maximum, and then press OK.

(The maximum number of copies varies by model.)

Tip: If you hold down either of the arrow buttons, the number of copies changes by increments of 5 to make it easier to set a large number of copies.

4Press Start Black or Start Color.

In this example, the HP PSC makes six copies of the original 4 by 6 inch (10 by 15 cm) photo.

copy

40 hp psc 2400 series