troubleshooting

chapter 15

problem

possible cause and solution

 

 

 

 

My USB cable is not

Connecting your computer to your HP PSC with a USB cable is

connected

straightforward. Simply plug one end of the USB cable into the back

 

of your computer and the other into the back of the HP PSC. You can

 

connect to any USB port on the back of your computer.

 

Note: AppleTalk is not supported.

 

 

 

 

 

 

 

 

 

 

 

 

additional installation troubleshooting help

You might want to refer to the Read Me file for more information on possible installation problems. On Windows, you can access the Read Me file from the Start button on the task bar; select Programs, Hewlett-Packard, hp psc

2400 series, View the Readme File. In Macintosh OS 9 or OS X, you can access the readme file by double-clicking the icon located in the top-level folder of the HP PSC software CD-ROM.

The readme file provides more information, including:

Using the reinstall utility after a failed installation to return your computer to a state that will allow the HP PSC to be reinstalled.

Using the reinstall utility in Windows 98 to recover from a Composite USB System Driver missing.

This error might occur if the hardware is installed prior to installing the software. After running the reinstall utility, reboot your PC, and install the HP PSC software before connecting the HP PSC to your computer.

You can also find more information on the HP website at:

www.hp.com/support

fax setup troubleshooting

Use this section to solve any problems you might encounter while setting up your HP PSC for faxing.

For information on how to set up your HP PSC for faxing, see fax setup on page 115.

144

hp psc 2400 series