maintain your hp psc

restore factory defaults

You can restore the original factory settings to what they were when you purchased your HP PSC.

Note: Restoring the factory defaults will not change the date information you set, nor will it affect any changes you made to scan settings and the language and country/region settings.

You can perform this process from the front panel only.

1Press Setup.

2Press 5, then press 3.

This selects Tools, and then selects Restore Factory Defaults.

Tools

1.Clean Print Cartridge

2.Align Print Cartridges

3.Restore Factory Defaults

4.Reprint Faxes in Memory

The factory default settings are restored.

set the power save time

The bulb in your HP PSC remains on for a specified period so that the HP PSC is immediately ready to respond to your request. When the HP PSC has not been used within that specified period, it turns the bulb off to preserve power and displays Power Save On in the color graphics display. You can exit this mode by pressing any button on the front panel.

Your HP PSC is automatically set to enter power-save mode after 12 hours. You can also choose 1, 4, 8, or 12 hours for the prompt delay time. Follow these steps if you want the HP PSC to enter this mode earlier.

1Press Setup.

2Press 7, then press 2.

This selects Preferences, and then selects Set Power Save Mode Time.

Preferences

1.Set Language & Country/Region

2.Set Power Save Mode Time

3.Set Prompt Delay Time

3Press until the appropriate time appears, then press OK.

psc hp your maintain

reference guide

89