use the fax features
3Press 3.
This selects Set New Defaults.
4Press OK.
set fax options
There are numerous fax options that you can set, such as controlling whether the HP PSC redials a busy number automatically. Review this section for information on changing fax options.
This section contains the following topics:
•redial a busy or unanswered number automatically on page 67
•use error correction mode (ECM) on page 68
•set automatic reduction for incoming faxes on page 68
•change the answer ring pattern (distinctive ringing) on page 68
•set the date and time on page 69
•set the paper size on page 69
•set tone or pulse dialing on page 70
•set backup fax reception on page 70
redial a busy or unanswered number automatically
You can set your HP PSC to redial a busy or an unanswered number automatically. The default setting for Busy Redial is Redial. The default setting for No Answer Redial is No Redial.
1Press Setup.
2Do one of the following:
–To change the Busy Redial setting, press 4, and then press 3. This selects Advanced Fax Setup and then selects Busy Redial.
–To change the No Answer Redial setting press 4, and then press 4 again.
This selects Advanced Fax Setup and then selects No Answer Redial.
fax
Advanced Fax Setup
1.Fax Reports Setup
2.Answer Ring Pattern
3.Busy Redial
4.No Answer Redial
5.Automatic Reduction
6.Backup Fax Reception
7.Error Correction Mode
Busy Redial
1. Redial
2. No Redial
No Answer Redial
1.No Redial
2.Redial
3Press 
to select Redial or No Redial.
4 Press OK.
reference guide | 67 |