9.Using the same sponge, clean the lower strip of electrical contacts on the printhead (unless the printhead is new), avoid touching the upper set of electrical contacts.

How do I... (ink system topics)

CAUTION Do not touch the surface of the printhead containing the nozzles, which are easily damaged.

10.After waiting a few moments to allow both connectors to dry, replace the printhead into the printhead carriage. See Insert a printhead.

11.On completion of the cleaning process, open the carriage interconnect wiper by pulling on the sponge tab.

12.Remove the soiled sponge from the carriage interconnect wiper.

ENWW

Clean a printhead's electrical connections 187