1.Insert each printhead cleaner into the correct color slot location, in the service station, in the direction indicated by the arrow shown here.

2.When the printhead cleaner has been pushed all the way in, press inwards and downwards as indicated by the arrow shown here, until it clicks into place.

If you have difficulty, see I cannot insert a printhead cleaner.

NOTE The front panel will not show the new printhead cleaner until the right-hand door is closed.

3.When you have inserted the printhead cleaner(s) into the printer, close the door.

NOTE The printer needs all the ink cartridges, printheads, and printhead cleaners to be installed before it can continue.

4.If no paper is loaded, the front panel will instruct you to load some.

How do I... (ink system topics)

ENWW

Insert a printhead cleaner 191