The printer's start-up process does not complete

(other ...is problem The topics)

If the printer's start-up process stops when the front panel is displaying the number 17, this indicates that there is a problem with the file system on the printer's hard disk, so the printer is checking the whole file system and making any necessary corrections. This problem can arise when there has been a power cut while the printer was switched on, or if there is a physical problem with the hard disk.

Checking the whole file system normally takes about half an hour. There is nothing you can do to speed it up. If you turn off the printer, the file system check will restart whenever you turn it on again.

If you experience this problem repeatedly when there has been no power cut, contact your customer service representative.

A front panel message

The front panel displays messages of many kinds; some allow you to continue using the printer while others require you to take action before you can continue.

●If the printer detects a condition of which you should be aware, it displays a message for your information. Examples of information messages are performance limiting conditions, and printer maintenance requirements. Once you have read the message you can remove it by pressing the Select key and continue to use the printer.

●If the printer detects an error, an error code and short message are displayed on the front panel. The following table provides suggested actions to recover from these error conditions:

Code

Short message

Suggested action

 

 

 

13:01

Reseat all cartridges

Remove and re-insert all the print cartridges; see Remove an

 

 

ink cartridge and Insert an ink cartridge. If the problem

 

 

persists, please contact your customer service representative.

 

 

 

26.0:01

Reseat yellow cartridge

The yellow cartridge is not detected, please try to re-install it;

 

 

see Remove an ink cartridge and Insert an ink cartridge. If the

 

 

problem persists, please contact your customer service

 

 

representative.

 

 

 

26.1:01

Reseat magenta cartridge

The magenta cartridge is not detected, please try to re-install

 

 

it; see Remove an ink cartridge and Insert an ink cartridge. If

 

 

the problem persists, please contact your customer service

 

 

representative.

 

 

 

26.2:01

Reseat black cartridge

The black cartridge is not detected, please try to re-install it;

 

 

see Remove an ink cartridge and Insert an ink cartridge. If the

 

 

problem persists, please contact your customer service

 

 

representative.

 

 

 

26.3:01

Reseat cyan cartridge

The cyan cartridge is not detected, please try to re-install it;

 

 

see Remove an ink cartridge and Insert an ink cartridge. If the

 

 

problem persists, please contact your customer service

 

 

representative.

 

 

 

286 Chapter 23 The problem is... (other topics)

ENWW