(printer ...I do How [4500] topics) assembly
14.If Reseat is displayed on the front panel, check that the protective tape has been removed. Then try reseating the printhead more firmly. If the problem persists, see I cannot insert a printhead.
15.Close the carriage assembly cover.
16.Make sure the latch engages correctly.
17.Close the printer window.
18.Please wait while the printer checks the printheads (~1 minute).
Install the printhead cleaners
1.Wait until you see this front panel message.
74 Chapter 3 How do I... (printer assembly topics) [4500] | ENWW |