(printer ...about me Tell topics)
To find the sockets for these interfaces on your printer, see Connect the printer (4000 series) or Connect and switch on the printer (4500 series).
To set up your operating system to use the printer, see one of the following:
●Connect to a network (Windows)
●Connect to a network (Mac OS X)
●Connect to a network (Mac OS 9) [4000]
●Connect directly to a computer (Windows)
●Connect directly to a computer (Mac OS X)
●Connect directly to a computer (Mac OS 9) [4000]
The printer's rear lights
At the rear of the printer, above the power switch, are three small lights:
●The amber light on the left is on when the printer is in sleep mode.
●The blue light in the center is on when the printer is on (when it has electrical power).
●The green light on the right is on when the printer is printing.
NOTE You should never see all three lights on at the same time, because the printer cannot print in sleep mode.
The printer's internal prints
The internal prints give various kinds of information about your printer. They can be requested from the front panel without using a computer.
Before requesting any internal print, make sure that paper is loaded (roll or sheet), and that the front panel displays the Ready message. The paper should be at least 36 in (91.44 cm) wide, otherwise the print may be clipped (HP Designjet 4000 series) or put “on hold for paper” (HP Designjet 4500 series).
To print any internal print, select the 
icon, then Internal prints, then select whichever internal print you want.
300 Chapter 25 Tell me about... (printer topics) | ENWW |