topics) (paper ...I do How
Load a roll onto the spindle [4000]
NOTE This topic applies to the HP Designjet 4000 Printer series only.
1.Make sure the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving.
2.Lower the spindle lever.
3.Remove the
The spindle has a stop at each end to keep the roll in position. The stop at the
4.Remove the blue paper stop (1) from the
5.If your roll has a
6.The roll may be very long; rest the spindle horizontally on a table and load the roll on the table. Bear in mind that you may need two people to handle it.
108 Chapter 6 How do I... (paper topics) | ENWW |