(printer ...I do How [4000] topics) assembly

9.Fix the left leg to the cross-brace using two screws on the outer side of the leg.

10.Lower the right leg onto the right side of the cross-brace. The right leg will fit only on the right side of the cross-brace.

11.Fix the right leg to the cross-brace using four screws on the inner side of the leg.

12.Fix the right leg to the cross-brace using two screws on the outer side of the leg.

13.Position a foot on the left leg. There are pins to help you to position the foot correctly.

NOTE Do not remove the anti-slip material from the wheel.

16 Chapter 2 How do I... (printer assembly topics) [4000]

ENWW