(printer ...I do How [4500] topics) assembly

4.Lower the cross-brace onto the L and R boxes.

5.You now need to identify which is the left and right side of the cross-brace. On the left side (1) you will see two holes, as shown; on the right side (2) you will see one hole.

6.You will need the bag of screws and the screwdriver provided. You may notice that the screwdriver is slightly magnetic.

7.Identify the left leg (A) as shown below. Remove the two leg covers from the left leg.

50 Chapter 3 How do I... (printer assembly topics) [4500]

ENWW