4.You now need to identify which is the left and the right side of the cross-brace.

(1)left (2) right (3) one hole (4) two holes

5.Now you will need the bag of screws and the screwdriver provided. You may notice that the screwdriver is slightly magnetic.

6.Remove the two leg covers from the left leg.

7.Lower the left leg onto the left side of the cross-brace. The left leg will fit only on the left side of the cross-brace.

8.Fix the left leg to the cross-brace using four screws on the inner side of the leg.

How do I... (printer assembly topics) [4000]

ENWW

Assemble the stand 15