
(scanner ...I do How [4500] topics)
Collate copies
1.Press the Print tab.
2.Press the Add to List button.
3.Using the check boxes, select multiple files for printing.
4.Press the Number of Sets button and select the number of copies you wish to print.
5.Press the Print button.
The files that you selected form a set, which is printed the number of times that you selected.
Clean the glass
1.Turn the scanner power off and disconnect the scanner power cable.
2.Push down on the two lever buttons found near the insertion slot on each side of the scanning area lid. The scanning area lid locking mechanism should now be disengaged.
3.As you hold both lever buttons down, place your free fingers in the insertion slot and flip the scanning area lid open. The scanning area is now exposed for cleaning.
4.Gently wipe the glass plate with a
CAUTION Do not use abrasives, acetone, benzene, or fluids that contain these chemicals. Do not spray liquids directly onto the scanner's glass plate or anywhere else in the scanner.
The lifespan of the glass plate depends on the paper types that pass across it. Abrasive papers such as mylar may cause premature deterioration, in which case the replacement of the plate is the customer's responsibility.
5.Dry the glass completely using a separate clean, dry
Set sleep and
1.Press the Setup tab.
2.Press the Options button.
3.Press the System button.
4.Press the WIDEsystem button.
●To activate automatic
To modify the time, select the hours digits and press the up or down buttons and then select the minutes digits and repeat the process. Select AM or PM, and press the up or down buttons.
●To activate automatic power off, select the check box for the day in the Off column, then set the time as described above.
5.Press the Apply button to confirm your changes and continue or press the OK button to confirm changes and exit WIDEsystem.
234 Chapter 16 How do I... (scanner topics) [4500] | ENWW |