Removing the Drive#Belt Pulley

Removal

1.Remove the encoder strip ' page 8#15.

In the following step, take care not to break the black plastic tab on top of the motor.

2.Press the carriage motor towards the left, and remove the belt from the motor shaft.

If you need greater maneuverability of the motor, press the black plastic tab on top very slightly downwards.

B

A

Re￿ssem￿ling: Make sure the belt is correctly positioned on the shaft grooves.

3.On the left of the Printer, remove the belt from the pulley.

8-42

HP DesignJet 430, 450C and 455CA Printers

Removal and Installation