4.Inserting a screwdriver under the side#plate on the right of the entry platen, lever the entry platen over to the left, so that it is flush against the left side#plate.

There must be no space between the entry platen and the right

side￿plate. It doesn't matter if there is a small space between the entry platen and the left side￿plate.

5.Replace the screw (item 1) on the right#hand side and the screw (item 3) on the left#hand side.

1.Tighten the screws, making sure that the entry platen is aligned tight against the right side#plate.

8-54

HP DesignJet 430, 450C and 455CA Printers

Removal and Installation