Printing the Service Configuration Plot
To print the service configuration plot:
1In service mode 2, load a sheet in portrait orientation. In normal mode, load a sheet in portrait orientation.
The service configuration plot can be plotted without the need to enter the service mode. This is because the customer will be requested to plot the service configuration plot and he will be given the following instructions to plot it without entering the service mode.
2When the Ready LED lights up, press the Print Quality and Media Type keys.
3The Ready light begins to flash and then remains on (steady).
The Printer plots the service configuration plot and ejects the media.
4Unload the media.
Interpreting the Service Configuration Plot
The parameters on the Service Configuration Plot can help you to troubleshoot the Printer more effectively. Here is a short description of the all the parameters.
Number of Power Cycles
How many times the Printer has been powered ON.
Number of Color Plots
How many color plots have been produced since the EEROM was last erased.
Number of Black Plots
How many mono plots have been produced since the EEROM was last erased.
HP DesignJet 430, 450C and 455CA Printers | Service Tests |