Moisture on Printer
Users should use the Printer in an environment between 5% and 95% relative humidity To recover from moisture condensation turn the Printer off and using the main roller as a reference wait until the Printer is completely dry before using it again
Level of Printer Usage
To achieve good performance and long lifetime of the PDesignet 430/450C/455CA Printers users should limit use to the following recommendations duty cycle:
Average number of plots per day |
| Maximum number of plots per day |
|
|
|
10 E/A0 CAD plots |
| 20 E/A0 CAD plots |
The service configuration plot gives an indication of how much the Printer has been used: number of plots number of cartridges number of times the Printer has been turned on Details ' page 4729
Friction on Slider Rod
The carriage bushings are made of a porous composite material Oil stays inside them by means of capillary action Never place the bushings on an absorbant material To prevent friction of the bushings on the slider rod remove dirt from the slider rod and chassis beam Apply oil Anderol 406 P part number: 6040705 to the slider rod 3 drops and to the bushings if they are running dry
Noisy Carriage Wheel
To prevent noisy movement of the carriage remove aluminum or dust particles from the wheel at the back of the carriage and from the slider path along which the wheel moves
HP DesignJet 430, 450C and 455CA Printers | Preventive Maintenance |