To print the network configuration page from the printer control panel

From the Home screen, touch right arrow , and then select Setup. Touch Reports, and then select Network Configuration Page.

Clear jams

Occasionally, media becomes jammed during a job. Try the following remedies to reduce jams.

Make sure that you are printing with media that meets specifications. For more information, see Media specifications.

Make sure that you are printing with media that is not wrinkled, folded, or damaged.

Make sure that the printer is clean. For more information, see Maintain the printer.

Make sure that the trays are loaded correctly and are not too full. For more information, see Load media.

This section contains the following topics:

Clear paper jams

Avoid paper jams

Clear paper jams

If the paper was loaded in the main tray, you might need to clear the paper jam from the rear door.

Paper can also jam in the automatic document feeder (ADF). Several common actions can cause paper to jam the ADF:

Placing too much paper in the ADF tray. For information on the maximum number of sheets allowed in the ADF, see Load an original on the scanner glass.

Using paper that is too thick or too thin for the printer.

Trying to add paper to the ADF tray while the printer is feeding pages.

To clear a jam

Use these steps to clear a paper jam.

1.Grasp the right end of the duplexer and slide to the left, and then pull the duplexer towards you.

- Or -

Clear jams

161

Page 165
Image 165
HP 6500A - E710a, 6500A Plus - E710n manual Clear jams, Clear paper jams, To clear a jam