HP 6500A - E710a, 6500A Plus - E710n manual Set the fax speed, Set the fax sound volume

To set the redial options

1.Touch right arrow , and then select Setup.

2.Touch Fax Setup, and then select Advanced Fax Setup.

3.Touch to select the appropriate Busy Redial or No Answer Redial options.

Set the fax speed

You can set the fax speed used to communicate between your printer and other fax machines when sending and receiving faxes.

If you use one of the following, setting the fax speed to a slower speed might be required:

•An Internet phone service

•A PBX system

•Fax over Internet Protocol (FoIP)

•An integrated services digital network (ISDN) service

If you experience problems sending and receiving faxes, try using a lower Fax Speed. The following table provides the available fax speed settings.

Fax speed setting	Fax speed
Fast	v.34	(33600 baud)
Medium	v.17	(14400 baud)
Slow	v.29	(9600 baud)

To set the fax speed

1.Touch right arrow , and then select Setup.

2.Touch Fax Setup, and then touch Advanced Fax Setup.

3.Touch down arrow , and then select Fax Speed.

4.Touch to select the speed.

Set the fax sound volume

Use this procedure to increase or decrease the volume of the fax sounds.

To set the fax sound volume

1.Touch right arrow , and then select Setup.

2.Touch Fax Setup, and then select Basic Fax Setup.

3.Touch down arrow , and then select Fax Sound Volume.

4.Touch to select Soft, Loud, or Off.

Change fax settings 63