Solution 5: Check for a paper jam

Solution 6: Service the printer

Solution 1: Restart the printer

Solution: Turn off the printer, and then unplug the power cord. Plug the power cord back in, and then press the Power button to turn on the printer.

Cause: The printer experienced an error.

If this did not solve the issue, try the next solution.

Solution 2: Make sure the paper is loaded correctly

Solution: Make sure that the paper is loaded correctly in the input tray. For more information, see:

Load media

Cause: The paper was not loaded correctly.

If this did not solve the issue, try the next solution.

Solution 3: Check the print settings

Solution: Check the print settings.

Check the paper type setting to make sure it matches the type of paper loaded in the input tray.

Check the print quality setting and make sure it is not set too low.

Print the image with a high print quality setting, such as Best or Maximum dpi.

Cause: The paper type or print quality settings were set incorrectly. If this did not solve the issue, try the next solution.

Print troubleshooting

93

Page 97
Image 97
HP 6500A - E710a manual Solution 2 Make sure the paper is loaded correctly, Solution 3 Check the print settings