list of HP Instant Share destinations. HP Instant Share Setup is also available through the Settings
●Macintosh: In the Finder navigate to Applications >
To set HP Instant Share options
1.Press HP Instant Share.
2.Select HP Instant Share options, then press OK.
3.Select one of the following options, then press OK:
–Receive options:
•Receive from allowed senders tells the printer to receive only collections that have been sent by approved senders.
•Receive from any unblocked sender tells the printer to receive all collections.
–Auto checking:
This is on by default. If you do not want the printer to check for HP Instant Share collections automatically, select Off.
•On makes the printer check for HP Instant Share collections at regular intervals.
•Off keeps the printer from checking for collections.
–Remove collections lets you select received collections you want removed.
–Device name displays the network name of the printer.
–Reset HP Instant Share resets all HP Instant Share options to the defaults. This means you have to go through HP Instant Share set up again to register the printer with the HP Instant Share service.
To use HP Instant Share (USB) to send photos
1.Insert a memory card and select some photos.
2.Press HP Instant Share.
3.Follow the instructions on your computer to share the selected photos with others.
See the onscreen Image Zone Help for information about using HP Instant Share.
To use HP Instant Share (network) to send photos
1.Insert a memory card and select some photos.
2.Press HP Instant Share.
3.Select a destination, then press OK.
4.Select Send photos, then press OK.
If the destination is an
HP Image Zone Help.
HP Photosmart 8400 series User's Guide | 39 |