Chapter 1
●SmartFocus: Turn on to focus images for clearer, sharper detail.
–On
–Off (default)
●Digital Flash: Turn on to improve photos with poor lighting and contrast.
–On
–Off (default)
●Change the print quality
–Normal
–Best (default)
Normal uses less ink than Best, and applies only to the current print job. The setting then automatically resets to Best.
●Print a sample page: Select to print a sample page useful for checking the print quality of the printer.
●Print a test page: Select to print a test page containing information about the printer that can help in troubleshooting problems.
●Network settings
–Display network IP address: Select to display the IP address of the printer.
–Print network settings page: Select to print a network configuration page that you can use for troubleshooting network connections or for the initial network setup.
–Reset network settings: Select to reset the network settings to the factory defaults.
–Reset Bluetooth settings: Select to reset the Bluetooth settings to the factory defaults.
●Clean the print cartridges: Select to clean the print cartridges. After the cleaning finishes, the printer prints a test page. You have the option to clean the cartridges again if the test page shows that they are still not clean.
●Calibrate the printer: Select to calibrate the printer.
●Select paper settings
–
–Manually set: Lets the user manually select paper type and width.
●Select language: Select to indicate the language you want used on the printer display.
●Reset all menu settings: Restores factory settings for all menu items except Select language.
8 | HP Photosmart 8700 series |
