Chapter 2

Paper type

Any supported photo or plain paper media

How to load

1.Raise the Out tray (4).

2.Load paper print-side down. Press the Main tray release (2) and pull out the tray if needed for easier access. Check that the stack of paper is no higher than the top of the paper-length guide (3).

3.Adjust the Main tray paper-width guide (1), as needed.

4.Lower the Out tray (4).

Tray to load

Main tray

1 Main tray paper-width guide

2 Main tray release

3 Paper-length guide

4 Out tray

Any supported

1.

Load paper print-side

photo or plain

 

down into the front feed

paper media—ideal

 

slot (1). If you are using

for envelopes

 

tabbed paper, insert the

 

 

paper so the tab feeds in

 

 

last.

 

2.

Adjust the front feed slot

 

 

paper-width guide (3), as

 

 

needed.

Front feed slot

1 Front feed slot

2 Out tray

3 Front feed slot paper-width guide

Stiff media, such as

1.

Load paper print-side up

cardstock (Not

 

into the rear feed slot (1).

supported: photo

2.

Adjust the rear feed slot

board and banner

 

paper-width guide (2), as

printing)

 

needed.

Tips

To avoid jams and paper skewing, load one sheet at a time straight into the slot

Use only stiff stock media

Do not use for photo board or banner printing

Only use this slot when printing from a computer. Not for use when printing from the printer's control panel.

Rear feed slot

1 Rear feed slot

2 Rear feed slot paper-width guide

12

HP Photosmart 8700 series

Page 16
Image 16
HP 8700 manual Paper type, How to load, Tray to load