Copyright Information

© 2003 Copyright

Hewlett-Packard Development

Company, L.P.

Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws.

Edition 1.1, 11/2003

Notice

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Auser of the Hewlett-Packard product associated with this guide is granted a license to: a) print hard copies of this user guide for PERSONAL, INTERNAL, or COMPANY use subject to the restriction not to sell, resell, or otherwise distribute the hard copies; and b) place an electronic copy of this user guide on a network server, provided access to the electronic copy is limited to PERSONAL, INTERNAL users of the Hewlett-Packard product associated with this guide.

Acknowledgements

HP ColorSmart III and HP PhotoREt IV are trademarks of Hewlett-Packard Company.

Microsoft® , Windows® , Windows NT® , and MS-DOS®are U.S.-registered trademarks of Microsoft Corporation.

Pentium® is a U.S.-registered trademark of Intel Corporation.

TrueType™ is a U.S. trademark of Apple Computer, Inc.

UNIX® is a registered trademark of the Open Group.

Safety Information

Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock.

1Read and understand all instructions in the documentation that comes with the printer.

2Use only a grounded electrical outlet when connecting this product to a power source. If you do not know whether the outlet is grounded, check with a qualified electrician.

3Observe all warnings and instructions marked on the product.

4Unplug this product from wall outlets before cleaning.

5Do not install or use this product near water, or when you are wet.

6Install the product securely on a stable surface.

7Install the product in a protected location where no one can step on or trip over the line cord, and the line cord cannot be damaged.

8If the product does not operate normally, see “Troubleshooting”.

9There are no user-serviceable parts inside. Refer servicing to qualified service personnel.

ENWW

Page 3
Image 3
HP 9600 manual Enww