Ink is not filling the text or graphics completely

￿Check the print cartridges

If the print cartridge lights are on or blinking, see “Printer lights reference”.

A print cartridge may be low or out of ink. Check the print cartridge ink levels.

Windows: See “Using the Toolbox”.

Macintosh: See “Displaying the HP Inkjet Toolbox”.

Replace any low or empty print cartridges (see “Installing or replacing the print cartridges”) and then print again.

The print cartridges may have poor contact. Try removing and then reinstalling the print cartridges, making sure to snap them firmly into place (see “Installing or replacing the print cartridges”). To clean the electrical contacts, see “Cleaning the print cartridges”.

If you are printing with only one print cartridge, see “Printing with a single print cartridge”.

Whenever print quality deteriorates, it is a good idea to clean the print cartridges. See “Cleaning the print cartridges”.

Check that all the lines on the test page are connected and printed properly. If the lines are broken, your print cartridge is probably out of ink. Replace your print cartridge with a new one (see “Installing or replacing the print cartridges”). See “HP supplies and accessories” for replacement information.

￿Check the paper type

Some paper types are not suitable for use with your printer. See “Selecting print media”for tips on using print media.

￿Check the print quality setting

The Fast options use less ink and print at a faster rate, which is good for printing drafts. To achieve a better colored printout, select Normal, Best, or Maximum dpi print quality in the printer driver.

6-18

ENWW

Page 93
Image 93
HP 9600 manual Ink is not filling the text or graphics completely