Printer takes a long time to print
To enhance the performance of your printer, check the following:
Multiple software applications are open
If multiple applications are open, the computer may not have sufficient resources for the printer to print at its optimum speed. To increase printer speed, close all unused software applications when printing. If necessary, restart your system, and then resend your print job.
Complex documents, graphics, or photographs are printing
Documents containing graphics or photographs print slower than text documents.
For Windows, if your computer does not have enough memory or disk space to print the document under normal conditions, you can use Low Memory Mode. Using this option may reduce the quality of the printout. Low Memory Mode also disables 4800 x 1200 optimized dpi* printing.
To activate Low Memory Mode:
iOpen the printer driver (see “Printing a document”).
iiClick the Basics tab, and then click the Advanced Features button.
iiiSelect Low Memory Mode.
ivPrint the document.
*Up to 4800 x 1200 optimized dpi for color printing and 1200 input dpi. This setting will temporarily use a large amount of hard disk space (400 MB or more) and will print slower. Photo cartridge, if present, further enhances the print quality.
Check the print quality
The printer prints slower when Best or Maximum dpi is selected as the print quality. To increase the printer speed, select a different print quality mode in the printer driver.
Automatic paper type option is enabled
When the automatic paper type option is enabled (see “Using the automatic
To increase the print speed, select the specific paper type in the printer driver.
Check your system configuration
•See “Printer specifications”for recommended system requirements.
•There may be insufficient virtual memory in your system. Increase the size of your system’s virtual memory. See the Windows or Macintosh help.
Check your port and cable settings (Windows 98/Me only)
•If you are using a parallel connection, use an
•If you are using a parallel connection, try switching to a USB connection. See “Connecting the printer”.
•The port setting configuration in your system may not be set to ECP. See the manual that comes with your computer for information on how to change your port setting or contact your computer manufacturer.
ENWW |