Printing on cards and smaller-sized media

If you are printing on thick paper (such as cardstock), you can use the rear manual feed slot. See “Printing with the front or rear manual feed slot”.

1Raise the output tray and remove any media from the input tray.

2Insert up to 60 cards, or a stack of media that does not exceed the height of the paper width guide, print-side down along the right side of the input tray until it stops.

3Open the small media guide by moving it 90 degrees clockwise from start to end position.

4Press the button on top of the paper width guide and slide the guide to the right until it stops at the edge of the cards.

1

4

32

5Press the input tray lock and retract the tray until the small media guide stops at the edge of the cards.

6Lower the output tray.

6

5

ENWW

4-19

Page 52
Image 52
HP 9600 manual Printing on cards and smaller-sized media