HP 9600 manual Using print cartridges, Accessories, Using the auto-duplex unit

3	Using print cartridges and
	accessories

Using the auto-duplex unit

You can print on both sides of a sheet of paper automatically when the auto-duplex unit is installed on the printer.

The auto-duplex unit is a standard part in the hp deskjet 9670. It may be purchased separately in some countries/regions (see “HP supplies and accessories”).

For instructions on printing with the auto-duplex unit, see “Printing on both sides (duplexing)”.

Installing the auto-duplex unit

1Remove the rear access panel by pushing the release buttons towards each other and pulling the rear access panel out of the printer.

2Insert the auto-duplex unit straight into the back of the printer until both sides snap into place.

Do not press the buttons on either side of the auto-duplex unit when installing it. Use these buttons only for removing the auto-duplex unit from the printer.

3

3-1 ENWW