
To complete a hardware-first installation
Complete the setup using these instructions if you have already connected a USB or parallel cable to the printer and computer, and the Found New Hardware wizard appears.
If you have connected the parallel or USB cable to your printer and turned on the printer, do not turn off the printer or unplug the cable from the printer when the printer setup program is running. If you do so, the setup program will not finish.
1On the screen that allows you to select a method to locate the driver, select the advanced option and click Next.
Do not allow the hardware wizard to perform an automatic search for the driver.
2Select the check box that allows you to specify the driver location, and ensure the other check boxes are cleared.
3Insert the Starter CD into your
4Browse to locate the root directory on the Starter CD (for example, D:), and then click OK.
5Click Next and follow the onscreen instructions.
6Click Finish to close the Found New Hardware wizard.
Upon completion of the installation process, the hardware wizard will automatically launch the printer setup program. This may take more than a minute. For Windows 98 and Me, you must complete the setup program at this point if you wish to install a
The setup program provides options to install
If you did not share the printer using the setup program and wish to do so later, see “Sharing the printer on a locally shared network (Windows)”.
ENWW |