
Power light blinks twice, stays off, | Printer is cancelling a print job. |
then repeats the pattern. | No action required. |
x2 | x2 |
Power light on, | Check for one of the following conditions: |
Resume light blinks. | Printer is waiting for special media to dry. |
| Press the Resume button if you do not want to wait. |
| You can change the dry time in the printer driver (see |
| “Ink is smearing”for instructions). |
| Printer is out of paper. |
| Load paper and press the Resume button to continue |
| the print job. |
Printer is waiting for a manual feed load.
If using front or rear manual feed slot, load paper and press the Resume button to continue the print job.
There is a media size mismatch.
Make sure the paper size selected in the printer driver matches the paper size loaded in the printer.
The printer has printed a banner and the banner needs to be removed from the printer.
Press the Resume button to eject the banner media.
I/O stall.
Make sure your system is running properly and the printer is properly connected to your system. Then resend the print job. To check the system, see the guidelines in “Troubleshooting”.
Power light off, Resume light blinks. | Paper jam or paper motor stall. |
| Clear the jammed paper (see “Clearing jams”). After |
| clearing the jam, press the Resume button to continue |
| the print job. |
| If no paper jam exists, press the Resume button. If this |
| does not work, turn off the printer, and then turn it on |
| again. Then resend the print job. |
Power and Resume lights | Carriage stall. |
blink together at same time. | If there is a paper jam, clear the jammed paper (see |
| “Clearing jams”). After clearing the jam, press the |
| Resume button to continue the print job. |
| If no paper jam exists, press the Resume button. If this |
| does not work, turn off the printer, and then turn it on |
| again. Then resend the print job. |
Power and Resume lights | Service station stall. |
blink alternately. | If there is a paper jam, clear the jammed paper (see |
| “Clearing jams”). After clearing the jam, press the |
| Resume button to continue the print job. |
| If no paper jam exists, press the Resume button. If this |
| does not work, turn off the printer, and then turn it on |
| again. Then resend the print job. |
ENWW |