HP C4380-90100 manual One Device

1-10 Installing the Hardware

One Device

The OPTIONAL data cable that came with the CD-Writer Plus drive is only used if there is no cable already attached to the recommended IDE controller in your computer system or the cable supplied with your computer is not long enough.

Use the connectors at the two ends of the cable.

PIN-1

CD-Writer Plus

drive (end of cable)

Unused connector

Colored stripe

aligned with

each PIN-1

IDE controller located inside your computer

Two Devices

Attach the CD-Writer Plus to whichever connector is not in use (center or end) on the data cable already installed in your computer (DO NOT swap connectors).

The OPTIONAL data cable that came with the CD-Writer Plus is only used if there is no spare connector for the CD-Writer Plus on your cable or your cable is not long enough.

PIN-1

CD-Writer Plus

drive (either location not in use)

PIN-1

Follow the
data cable		Colored stripe
already
		aligned with
attached to the
		each PIN-1
other IDE device
in your
computer to
locate the IDE	IDE controller
controller
	located inside
	your computer

PIN-1

PIN-1