HP C4380-90100 manual Uninstalling the Software, If You Have Problems, Click the Start button

1-14 Uninstalling the Software

Uninstalling the Software

You can remove all CD-Writer Plus programs or individual programs.

CAUTION: If you want to reinstall the CD-Writer Plus’s software, first be sure to uninstall the original software.

1.Click the Start button.

■Point to Programs.

■Point to HP CD-Writer Plus.

■Point to Tools & Information.

■Point to Utilities.

■Click Uninstall.

2.Select the CD-Writer Plus’s program(s) that you wish to remove.

3.Click the Finish button.

The software is removed, including all related entries in your system registry.

If You Have Problems

Did you read the Install Recommendation (see page 1-2)?

There are many factors that need to be taken into consideration when installing an IDE device. By reading the install recommendation, you will know how to install successfully without needing to evaluate the technical details such as IRQs and “single” versus “dual” FIFO.

Can’t find the IDE controller in your computer?

Check the manual that came with your computer or call the computer manufacturer for assistance. The IDE controller may be located on the mother board or a daughter board. It may be hard to find because it is behind some other component inside your computer such as the power supply. Or, your computer may not have a connector attached for access to the IDE controller. DO NOT ATTACH THE CD-WRITER PLUS DRIVE TO A SOUND BOARD’S IDE CONTROLLER. Do not use the Colorado IDE Adapter board as an alternate IDE controller for the CD-Writer Plus.