HP C4380-90100 manual Pre-recording Audio Tracks to Wave Files

How to Make a Music CD 6-5

To record Wave files stored on your hard drive to a blank CD, follow these steps:

1.Insert a blank CD into your CD-RW drive.

2.Select New CD Layout from the File menu or open an existing layout.

3.Click the Audio CD Layout tab.

4.Select the Wave files you want to record from Explorer and drag them to the Audio CD Layout window.

5.To change the name of the song(s) see “Renaming Songs in Your CD Layout” on page 6-8.

6.Select Create CD from the File menu when you have finished adding all of the songs you want to record to your CD layout.

The CD Creation Setup box appears.

7.Make changes, if any, to the CD Creation Setup settings (see “CD Creation Setup Settings” in the Easy-CD Audio Online Help for descriptions) and click OK.

Easy-CD Audio begins recording your CD layout to a blank CD. A final message box notifies you when the recording is complete.

NOTE: To make a sleeve that lists the artist, CD title, and songs, see ”Chapter

7:Making Inserts and Labels”.

CDs	Chapter 6:
	Making
	Music

Pre-recording Audio Tracks to Wave Files

Pre-recording audio tracks to Wave files on your hard drive is a way to:

■Minimize swapping CDs in and out of your drive if you want to make more than one copy

■Add sound effects to customize the song (use a third-party sound editor)

■Improve the sound quality if your CD recording system is less than optimal