HP EMS HARDWARE S B6191-90028 manual #Pollinterval

Hardware Monitor Configuration Files

Monitor Configuration Files

#POLL_INTERVAL	5	#	polling interval in	minutes
#REPEAT_FREQUENCY	1440	#	in minutes, for one	day

#****************************************************************************#

#* This list of default		actions for each	severity also	appears in the	*#
#*	global configuration	file, and should	not generally	appear here.	*#
#*	It is shown for documentation purposes.				*#

#****************************************************************************#

#SEVERITY_ACTION	INFORMATION	NOTIFY
#SEVERITY_ACTION	MINOR_WARNING	NOTIFY
#SEVERITY_ACTION	MAJOR_WARNING	NOTIFY
#SEVERITY_ACTION	SERIOUS	NOTIFY
#SEVERITY_ACTION	CRITICAL	NOTIFY

#****************************************************************************# #* cfg-verb event# severity- action- -description- *# #****************************************************************************#

DEFINE_EVENT	101	CRITICAL	DEFAULT # The disk is	indicating a fault
DEFINE_EVENT	102	CRITICAL	DEFAULT # The disk is	not on the FC link
DEFINE_EVENT	201	CRITICAL	DEFAULT # The power supply has faulted
DEFINE_EVENT	202	CRITICAL	DEFAULT # The power supply is not recieving adequate AC
DEFINE_EVENT	301	CRITICAL	DEFAULT # The fan is not providing cooling
DEFINE_EVENT	302	CRITICAL	DEFAULT # Temperature	has exceeded critial threshold
DEFINE_EVENT	303	MAJOR_WARNING	DEFAULT # Temperature	has exceeded warning threshold
DEFINE_EVENT	304	CRITICAL	DEFAULT # Temperature	has exceeded low critial threshold
DEFINE_EVENT	305	MAJOR_WARNING DEFAULT # Temperature		has exceeded low warning threshold
DEFINE_EVENT	306	MAJOR_WARNING	DEFAULT # Temperature	sensor may have failed
DEFINE_EVENT	401	CRITICAL	DEFAULT # The enclosure services controller has failed
DEFINE_EVENT	501	CRITICAL	DEFAULT # The SCSI port/transceiver has lost the link
DEFINE_EVENT	502	CRITICAL	DEFAULT # The transmit signal has been lost
DEFINE_EVENT	601	CRITICAL	DEFAULT # Over voltage critical threshold exceeded
DEFINE_EVENT	602	MAJOR_WARNING	DEFAULT # Over voltage warning threshold exceeded
DEFINE_EVENT	603	CRITICAL	DEFAULT # Under voltage critical threshold exceeded
DEFINE_EVENT	604	MAJOR_WARNING DEFAULT # Under voltage warning threshold exceeded
DEFINE_EVENT	605	MAJOR_WARNING DEFAULT # Voltage sensor may have failed

Chapter 5 91